> Audio>Microfones>Emissores>Sistema in ear SHURE PSM200

Emissores

Information

Sistema in ear SHURE PSM200 Ver maior
Anterior Seguinte

Sistema in ear SHURE PSM200

PSM200

Novo

1 Artigo

The entry to professional in ear personal monitoring from Shure. This package contains SE-112 Sound Isolating earphones, a P2R receiver and a P2T transmixer.

Mais detalhes

470,00 €

Mais informação

    • RF Output Power: 10 - 30 mW (countryspecific)
    • Operating Distance: Up to 100 m
    • Harmonic distortion: 1.5 % typical
    • Signal-to-noise-ratio: 80 dB (A) typical
    • Listening mode: Mono
    • Compatible Systems per band (up to): 4
    • Transmitter Inputs: 2x XLR/6,3 mm combo, mic/line level
    • Transmitter Outputs: 2x XLR split outputs
    • Wired Bodypack Option: Yes
    • Personal Mix Control: On transmitter
    • Remoteable Transmitter: No
    • Battery Life: Wired: 6 h; Wireless: 4 h
    • Frequency Response: 30 Hz - 12 kHz

  • Further technical specifications:

    PSM®200 System

    • RF Carrier Frequency Range: 518­-865 MHz (country dependent)
    • Modulation: FM +/- 35 kHz Deviation (Nominal)
    • Operating Temperature: -7 degrees C to +49 degrees C (+20 degrees F to +120 degrees F) 

    EP2T TransMixer

    • Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)
    • Antenna: 1/4 Wavelength, semi-rigid, PCB Mount
    • Connector Type: XLR/1/4-inch combo
    • Nominal Input Level: 25 dBu @ 1/2 volume (12 o'clock)
    • Maximum Input Level: 5 dBu @ 1/2 volume (12 o'clock)
    • Current: 170 mA maximum
    • Dimensions: 220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
    • Net Weight: 370 g (13 oz.) 

    P2R Receiver

    • RF Sensitivity: 109 dBm typical
    • Squelch Threshold: 102 dBm typical
    • Antenna: Attached Whip
    • Audio Input Connector: Connector Type: 1/4-inch Mono
    • Impedance: 1 megohm
    • Maximum Input Level: LO = +0 dBu; HI = 10 dBu
    • Frequency Response: 30 Hz to 20 kHz (+/ 3 dB); earphone dependent
    • Power Requirements: 9 V alkaline battery, Duracell® type MN1604 recommended
    • Audio Output Connector: 1/8 inch (3.5 mm)
    • Minimum Load Impedance: 8 ohms
    • Net Weight: 100 g (3.52 oz.), less battery
    • Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

     SE112 Earphones

    • Frequency Range: 25Hz – 17.5kHz
    • Sensitivity: 108 dB SPL/mW (@ 1kHz)
    • Impedance: 16 Ohms (@ 1kHz)
    • Input Connector: 3.5mm (1/8”)
    • Colour: Gray 
    • Cable Length: 127 cm (64”)