Basics:GS=Gap Short (shortened electrode space)DE=Double Ended (double-sided lamp with threaded pin)SE=Single Ended (one-sided lamp)PAR=Lamp built in a parabolic reflector HMP=Due to their special filling and to their electrode system, HMP-lamps cannot only be "dimmed", but also be "boosted", i. e. be operated beyond their rated power. During this, the light technical characteristics, such as color temperature, color rendering index and light output are practically constant during "dimming" and "boosting".
HMI / MSR / HMP / OMI lamps
- Extremely high light output
- Best color rendering
- Light output three to four times higher in comparison to filament light
- Light is generated via an arc between two electrodes
- Spectrum similar to daylight
- Constant color temperature and color rendering behaviour over the whole lamp life
- Halogen metal evaporation lamps provide a spectrum composed of a lot of lines, in contrast to temperature radiators, as halogen-incandescent lamps
- Very high color rendering index (CRI)
- Made in Germany
| Operating voltage: | 100 V |
| Nominal wattage: | 1200 W |
| Base: | G38 |
| Lamp type: | Metal vapour lamp |
| Lamp specification: | Dimmable
Hot restrike |
| Color temperature: | 6800K |
| Color rendering index (CRI) more than: | 90 Ra |
| Burning position: | S180 (universal) |
| Lamp life: | 1000 h |
| Luminous flux: | 110000 lm |
| Dimensions (LxD): | 200x42 mm |
| Weight: | 280 g |
| Legal specifications |
| Special product: | Not designed for household room illumination |
| Intended use: | Show effect lighting |
