Se Electronics SE7
SE Electronics SE7 Microfone Condensador
SE Electronics SE7 Microfone Condensador
SE Electronics SE7 Microfone Condensador
SE Electronics SE7 Microfone Condensador
SE Electronics SE7 Microfone Condensador
SE Electronics SE7 Microfone Condensador
SE Electronics SE7 Microfone Condensador
Se Electronics SE7
SE Electronics SE7 Microfone Condensador
SE Electronics SE7 Microfone Condensador
SE Electronics SE7 Microfone Condensador
SE Electronics SE7 Microfone Condensador
SE Electronics SE7 Microfone Condensador
SE Electronics SE7 Microfone Condensador
SE Electronics SE7 Microfone Condensador

SE Electronics SE7 Microfone Condensador

SE7
80,49 €

Microfone de Condensador de uso geral. Percussao, Cordas, Piano, Etc

The sE7 is a high-quality back-electret small diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond.

With an optimized acoustic design, discrete class-A circuitry and a transformerless output, it delivers clear, natural sound quality at all frequencies, without suffering from fizzy highs or a lack of low-frequency punch.

The discrete electronics and the switchable attenuation pad ensure a high dynamic range, with high sound pressure level (SPL) handling capability and extremely low-noise components. The switchable low-cut filter helps eliminate rumble or footfall noise, and can also compensate for an excess of bass frequencies caused by the proximity effect. This enables the sE7 to close-mic many instruments including electric guitar speaker cabinets, brass instruments and drums.

 

Capsule Type: 1/2“ back-electret condenser capsule

Polar Pattern: Cardioid

Frequency range: 20 Hz - 20 kHz

Sensitivity: 19 mV/Pa (-34.5 dBV)

Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad)

Equivalent noise level: 16 dB(A)

Dynamic range: 120 / 140 dB (0/20 dB Attenuation pad)

Signal to Noise Ratio: 78 dB

Low-cut filter: 80 Hz, 6 dB/Oct, switchable

Attenuation Pad: 20 dB, switchable

Powering: 48 Volts according to IEC 61938

Electrical Impedance: <200 Ohms

Recommended load impedance: >1k Ohms

Current consumption: 3.0 mA

Connectivity: 3-pin male XLR connector

Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)

Weight: 128 g (4.52 oz.)

Também pode gostar

13 outros produtos na mesma categoria:

Usamos cookies para assegurar a melhor experiência
de navegação no nosso website.
Consulte a nossa Política de Privacidade.