O seu carrinho
Não existem itens no seu carrinho
LED KLS Laser Bar FX Light Set including aluminum speaker stand
EUROLITE LED KLS Laser Bar FX Light Set
Bar with 2 derbies, 2 spots, white strobe LEDs, laser (RG, 2M), foot switch
- 4in1 DMX light effect bar with laser, 2 rotating LED derbies, 2 LED spots and white strobe LEDs
- Laser class 2M: does not require additional protective measures or appointment of a laser safety officer
- Ultra-light, ideally suited for mobile use
- Crossbar with integrated DMX control unit and stand sleeve
- Comes pre-assembled with practical transport bag
- Convenient control via wireless foot switch and IR remote control
- 2 laser diodes project hundreds of red and green laser beams
- 2 rotating derbies for mirror ball effects with three bright LEDs (red, green and blue) each
- 2 spots three bright RGB LEDs (3in1) each
- 4 white strobe LEDs
- 37 built-in auto and music show programs that include all 4 effect units
- Control panel with LED display for easy configuration
- LED derbies and LED spots individually adjustable and interchangeable
- Swivel mounting brackets
- When fog is used, this effect becomes especially attractive
- Mains input and output for power linking up to 8 units
- Can be operated in 3; 5; 9; 27 CH mode
- The device is cooled by cooling fan
- Controlling by stand-alone; DMX; IR remote control; Sound to light via Microphone; Wireless footswitch; Master/slave function
- Preprogrammed in EASY SHOW; Light´J; LED PC-Control 512
- Effect: Multi beam effect; Strobe effect; laser
- For application areas such as: Wedding/gala
spotlight
- LED: Spot 2 x separate controlling each with 3 x high-power 3 W 3in1 TCL RGB (homogenous color mix)
light effect
- LED: Multi beam effect 2 x separate controlling each with 3 x high-power 1 W R/G/B
bar
- LED: Strobe effect 4 x high-power 1 W cold white (CW)
OMNITRONIC M-4 Speaker-System Stand
Aluminum speaker stand, height adjustable 140-345 cm, maximum load 18 kg
- Stable aluminum version
- Height adjustable in 10 steps, with locking pin
- Height: 140-345 cm
- Tube diameter: Ø 35 mm
- Centric load: 18 kg
- Scratch-resistant black finish
EUROLITE LED KLS Laser Bar FX Light Set | |
Power supply: | 100-240 V AC, 50/60 Hz |
Power consumption: | 50 W |
IP classification: | IP20 |
Protection class: | Class I |
Power connection: | Mains input IEC connector (M) mounting version power supply cord with safety plug (provided) |
Power output: | 1 x IEC connector (F) mounting version |
Device fuse: | 5 x 20 mm, F 1 A Fuse replaceable |
Lamp type: | LED lamp |
Flash rate: | 0 - 30 Hz |
DMX channels: | 3; 5; 9; 27 |
DMX input: | 1 x 3-pin XLR (M) mounting version |
DMX output: | 1 x 3-pin XLR (F) mounting version |
Cooling: | Cooling fan |
Control: | Stand-alone; DMX; IR remote control; Sound to light via Microphone; Wireless footswitch; Master/slave function; EASY SHOW; Light´J; LED PC-Control 512 |
Housing color: | Black |
Dimensions: | Width: 1,32 m Depth: 14,5 cm Height: 32 cm |
Weight: | 9,05 kg |
Noise classification: | Class 2 (slight noise) |
Laser | |
Laser class: | Class 2M |
Laser color: | R/G |
Laser module: | Red (R) 100 mW 650nm Green (G) 30 mW 532nm |
Spotlight | |
LED: | Spot 3 x high-power 3 W 3in1 TCL RGB (homogenous color mix) |
Beam angle: | 13° |
Beam angle (1/2 peak): | 13° |
Beam angle (1/10 peak): | 20° |
Light effect | |
LED: | Multi beam effect 3 x high-power 1 W R/G/B |
Bar | |
LED: | Strobe effect 4 x high-power 1 W cold white (CW) |
Beam angle (1/2 peak): | 7° |
Foot control | |
Battery: | 1 x 9.0 V E block 6LR61 alkaline manganese (provided) |
Remote control | |
Battery: | 1 x Button cell 3.0 V CR2025 lithium manganese built-in |
OMNITRONIC M-4 Speaker-System Stand | |
Maximum carrying capacity: | 18 kg |
Tube diameter sector: | 38 - 35 mm |
Height: | Maximum: 345 cm Minimum: 140 cm |
Attachment system: | Ø 35mm |
Type (general stands): | Speaker stand/manual |
Material: | Aluminum |
Color: | Black |
Transport dimensions: | 1,4 m x 13,5 cm |
Weight: | 3,30 kg |